USR Courier V.34 Modem Settings

[Last updated 2/20/96]

These are register and dip switch settings of the US Robotics V.34 Courier modem that I have found useful for bidirectional modem setup on Solaris 2.x and SunOS 4.1.3+.

This is the setup I often use for fixed-DTE speed (Sun-to-modem) 38400 8N1, bidirectional (dial-in and dial-out) applications.

USRobotics Courier V.32bis V.34 Fax Settings...

   B0  C1  E1  F1  M1  Q2  V0  X0
   BAUD=38400  PARITY=N  WORDLEN=8
   DIAL=TONE   ON HOOK   TIMER   

   &A0  &B1  &C1  &D2  &G0  &H1  &I0  &K1 &L0  &M4  &N0
   &P0  &R1  &S0  &T5  &X0  &Y1  %N6

   S00=001  S01=000  S02=255  S03=013  S04=010  S05=008  S06=002  S07=060
   S08=002  S09=006  S10=007  S11=070  S12=255  S13=000  S14=000  S15=000
   S16=000  S17=000  S18=000  S19=000  S20=000  S21=010  S22=017  S23=019
   S24=150  S25=005  S26=001  S27=000  S28=008  S29=020  S30=000  S31=000
   S32=009  S33=000  S34=000  S35=000  S36=000  S37=000  S38=000  S39=000
   S40=000  S41=000  S42=126  S43=200  S44=015  S45=000  S46=000  S47=000
   S48=000  S49=000  S50=000  S51=000  S52=000  S53=000  S54=064  S55=000
   S56=000  S57=000 

   Dip Switches: (UP=dip switch up, DN=dip switch down)

     1  UP  DTR normal
     2  DN  Numeric messages (a starting point for tip usage)
     3  DN  Display Result Codes
     4  UP  Modem does not echo commands
     5  UP  Modem answers on 1st ring, or DN for no auto-answer
     6  UP  CD indicates the modem is online and carrier signal is present
     7  DN  suppress result codes in answer mode
     8  DN  Normal AT command set recognition
     9  DN  on Escape code (+++) modem stays online
     10 UP  Power on loads registers from NVRAM