[SunHELP] strange boot issue
Connolly, Michael - ITT Interconnect Solutions
Michael.Connolly at itt.com
Tue Feb 7 20:06:16 CST 2017
I recently restored the OS from a tape backup of one E280R to another E280R.
This box has 3 T3 arrays, I restored to c1t1d0s#.
I have a running OS on c2t1d1s# that I can easily boot on the same box
When I boot c1t1d0s# array, it fails with "/dev/dsk/c1t1d0s6" no such device
(I made this slice /usr so boot will not continue)
BUT when I boot from c2t1d0s# array, it boots fine (original OS on the box)
and I can mount /dev/dsk/c1t1d0s6 to a temp mount point and see all of the
/usr files are there.
I tried boot -r but no go. Really mystified why this is happening.
Michael J. Connolly
PLM Consultant/Solution Architect
ITT Cannon LLC
56 Technology Drive
Irvine, CA 92618
Michael.Connolly at itt.com<mailto:Michael.Connolly at itt.com>
"The only source of knowledge is experience." - Albert Einstein
CONFIDENTIALITY NOTICE: This message including any attachments and/or linked
documents is intended for the sole use of the intended recipient and may
contain information that is privileged, confidential, proprietary or otherwise
protected by law. Any unauthorized review, dissemination, distribution or
copying is prohibited. If you have received this communication in error please
contact the original sender immediately. Please note that any views or
opinions presented in this message are solely those of the individual and do
not necessarily represent those of ITT Inc.
[demime 1.01d removed an attachment of type image/jpeg which had a name of image001.jpg]
More information about the SunHELP