[SunHELP] XVR-1000 in a Blade 1000
listmail at triad.rr.com
Sat Feb 7 18:50:24 CST 2009
looking at last section of
http://dlc.sun.com/pdf/816-1330-11/816-1330-11.pdf , maybe via eeprom,
create a devalias for /devices/upa at 8,480000/SUNW,gfb at 0,0:gfb0 and set
> I've got a problem with an XVR-1000 in a Blade 1000~ ( running Solaris 10).
> I've replaced an Expert3D with the XVR-1000. I don't get any display, either OpenBoot or windowing system, but the system boots fine - I can SSH in or log into the connected Sun Ray.
> 'fbconfig' sees the card and the monitors attached to it (one on the 13w3 and one on the DVI). I tried installing the driver (downloaded from Sun's site), but it said "This machine is running Solaris 10, which is not supported".
> '/dev/fb' points to '/devices/upa at 8,480000/SUNW,gfb at 0,0:gfb0', and 'output-device=screen'. I've tried setting the card back to factory defaults ('fbconfig -default -dev gfb0').
> Can anyone suggest what to try next?
> Thanks in advance,
> Hotmail, Messenger, Photos and more - all with the new Windows Live. Get started!
> SunHELP maillist - SunHELP at sunhelp.org
More information about the SunHELP