[SunHELP] Solaris 9 & qlogic drivers
martin at omniconsumerproducts.com
Wed Jul 5 06:03:41 CDT 2006
On Wed, 5 Jul 2006, Monique Marais wrote:
> 1. I could see the hba's after probe-scsi-all
> /pci at 8,600000/SUNW,qlc at 2
> Fibre Channel link down
> (But its my understanding that the device path should be: /QLGC, qla at 2)
It looks like maybe your cards are using a Sun OBP driver rather than a
QLogic one, hence SUNW rather than QLGC in the OBP path.
Possibly you should be following a different set of instructions, for a
Sun version of the card.
This could be an OBP version issue, I guess.
Note: I have no direct experience of these cards - these are just
conjectures that may be helpful.
More information about the SunHELP