[SunHELP] Netra X1 LOM access
daleg at elemental.org
Sun Nov 27 11:27:55 CST 2005
On Nov 24, 2005, at 6:15 PM, abbey wrote:
> I am trying to access a netra x1 via lom. I am using
> the flat light-blue cisco cable. I have the serial
> end of the cable attached to a serial to usb convertor
> which is plugged into my mac. I am using zterm to
> access the console. my baud rate is set to
> 9600-N-8-1. I can access my other machine's console
> just fine using the db9-usb convertor, so i don't
> think that it's the convertor that's busted. is there
> anything i am missing or overlooking? any help would
> be appreciated. thank you very much in advance.
9600/8/n/1 is indeed the correct speed setting.
On the netras, the serial pinouts are reversed from normal, so I
would suggest (if you have them available) trying the green cisco
serial cable or any cable whose pinouts are reversed from the blue
one you're trying to use.
More information about the SunHELP