[SunHELP] Netra X1 LOM access
abhishake00 at yahoo.com
Mon Dec 5 18:18:54 CST 2005
sorry, was unaware that attachments were blocked.
here is the url to the pinning that i am using.
is there something i am missing?
--- Dale Ghent <daleg at elemental.org> wrote:
> On Nov 24, 2005, at 6:15 PM, abbey wrote:
> > Hi,
> > I am trying to access a netra x1 via lom. I am
> > the flat light-blue cisco cable. I have the
> > end of the cable attached to a serial to usb
> > which is plugged into my mac. I am using zterm to
> > access the console. my baud rate is set to
> > 9600-N-8-1. I can access my other machine's
> > just fine using the db9-usb convertor, so i don't
> > think that it's the convertor that's busted. is
> > anything i am missing or overlooking? any help
> > be appreciated. thank you very much in advance.
> 9600/8/n/1 is indeed the correct speed setting.
> On the netras, the serial pinouts are reversed from
> normal, so I
> would suggest (if you have them available) trying
> the green cisco
> serial cable or any cable whose pinouts are reversed
> from the blue
> one you're trying to use.
> SunHELP maillist - SunHELP at sunhelp.org
Yahoo! DSL Something to write home about.
Just $16.99/mo. or less.
More information about the SunHELP