[SunHELP] Adding network card to Sun E250
C. Ahmet MERCAN
ahmet.mercan at gmail.com
Thu Aug 11 04:30:14 CDT 2005
these settings works until first reboot. you must set IP and hostname
for new NIC at /etc/hosts and /etc/hostname.hme1 files. also you may
want to set routing.
Cem Ahmet MERCAN
James Marcinek wrote:
> Hello Everyone,
> I will be installing a second nic into a Sun e250 server and this will be my
> first so I'm hoping it won't be too difficult.
> My main concern is figuring out the network card type, which I don't know how
> it's usually done (eg eri, hme, etc)? Is there an easy way to do this? I know
> the prtdiag -v will display everything but I would like to know if there's other
> I would also like to know if I'm missing any other steps or getting this wrong
> * Once I know what type it is I could plumb the device:
> eg - ifconfig hme1 plumb
> * The assign the ip address and bring it up
> eg ifconfig hme1 192.168.0.25 netmask 255.255.255.0 up
> Do I also need to create the hostname.hme1 file or is this done by the plumb?
> SunHELP maillist - SunHELP at sunhelp.org
More information about the SunHELP