[SunHELP] Mirroring Setup After a hardware error on Boot Disk

Dale Ghent daleg at elemental.org
Mon Mar 1 15:24:44 CST 2004

On Mon, 1 Mar 2004 ymui at royalsunalliance.ca wrote:

> Hello Administrators,
> There is a hardware problem with the Boot Disk (disk0, i.e.
> /dev/dsk/c0t0d0s2).  The disk is replaced.  metadb commands are executed
> to re-define the database.  After re-establishing the mirroring (metastat
> shows everything ok), metadb -i shows:


there is no error there, your new metadbs are working fine.

You will only see the additional p, l and u flags if you reboot and the
kernel is configured from the information in /etc/system at start up.


More information about the SunHELP mailing list