[SunHELP] disksuite configuration
trivass at hotmail.com
Mon Jun 14 07:32:53 CDT 2004
Can anyone advise me on whether the following disksuite configuration
is suitable (and sensible....)
I have been tasked with re-configuring disksuite on an E450 with 12
1 x 33GB
9 x 18GB
2 x 9GB
Original set up was as follows:
33GB boot disk
logical volume (d10)consisting of 4 x 18GB disks.
Customer wanted both the boot disk and the volume to be mirrored, by
some combination of the existing disks.
I have done the following:
Created new boot disk on 1 x 9GB disk, and mirrored it with the other
Changed the disktype of the 33GB disk to that of SUN18G using "type"
option from within format. I then copied the partition table from one
of the 18GB drives being used for the logical volume to this disk.
I copied the same partition table onto the remaining 4 x 18GB disks
and created new submirror (d20), and then the mirrored volume (d30).
d10 5 1 /dev/dsk/c0t2d0s0 1 /dev/dsk/c0t3d0s0 1 /dev/dsk/c2t0d0s0 1
/dev/dsk/c2t1d0s0 1 /dev/dsk/c2t2d0s0
d20 5 1 /dev/dsk/c3t3d0s0 1 /dev/dsk/c3t2d0s0 1 /dev/dsk/c3t1d0s0 1
/dev/dsk/c3t0d0s0 1 /dev/dsk/c0t0d0s0
Have attached the submirrors to the mirror and the it is currently
Can anyone advise if there is anything I need to be aware of by
carrying out the configuration in this way.
Want to block unwanted pop-ups? Download the free MSN Toolbar now!
More information about the SunHELP