[SunHELP] Netra T1/105 and the fault LED
sunhelp at sunhelp.org
Mon Aug 13 11:55:18 CDT 2001
I've recently bought a Netra T1/105 vith 360 MHz processor and 512 MB RAM
through ebay. I installed Solaris 8 04/01, and everything seems to work =
However, one thing makes me nervous: the fault led: it is on, not bright,=
looks like flickering with 20-50 Hz.
I installed the LOM packages from the Solaris OS Supplement CD, and a lom=
bash-2.03# lom -a
1 OK speed 84%
2 OK speed 82%
3 OK speed 84%
LOMlite configuration settings:
serial escape character=3D#
serial event reporting=3Doff
alarm3 mode=3Duser controlled
product ID=3DNetra t1=FF105
LOMlite Event Log:
Alarm 3 OFF
Fault LED ON
Fault LED OFF
first fatal error
LOMlite alarm states:
LOMlite watchdog (ASR) settings:
Before installing the LOM packages I save Alarm3 set to on. I turned it =
the fault led stayed the same. I turned on the fault led, and it started
blinking. After turning off, it went dim again, but not completely off.
The fault led is dim on when I put in the power cable.
Is this something I have to worry about? Can I correct this?
Mit freundlichen Gr=FC=DFen
Dipl.-Ing. Frank-Christian Kr=FCgel
More information about the SunHELP