[rescue] Starting a Sun E450

[Peter Stokes]

Hi

Do you mean no fans start up?  If so check the interlock switches on the casing which it has from memory. 

Peter
Sent from my iPhone

> On 6 Nov 2025, at 17:59, Stephen Conley via rescue <rescue at sunhelp.org> wrote:
> 
> If you haven't already tried, pull out the framebuffer and just use the serial console.  I have a vague memory of needing to do something special in openboot to get the framebuffer to be the 'boot device' screen, and having it in there can confuse things.
> 
> If that works, hopefully someone else here can remember the secret sauce to make it boot on a framebuffer because I definitely do not remember.  If it doesn't work, well, it was low effort to try it at least :)
> 
> Good luck,
> 
> Steve
> 
>> On 11/6/25 12:43, Alan Perry via rescue wrote:
>> Hi,
>> 
>> I am trying to get the E450 that I mentioned previously running. It was running in the data center at work until it was decommissioned a couple months ago.
>> 
>> I collect and rescue sun3 desksides and sun4c and sun4m workstations but have no experience with the E450.
>> 
>> When I turn on the power switch on the back, both power supplies show green LEDs but nothing happens as I turn the front panel switch key through the different positions. It has a frame buffer (PGX32) but I am using the serial console. Nothing appears there.
>> 
>> Any suggestions?
>> 
>> alan
>> 
>> 
>> _______________________________________________
>> rescue list - http://sunhelp.org/mailman/listinfo/rescue_sunhelp.org
> 
> _______________________________________________
> rescue list - http://sunhelp.org/mailman/listinfo/rescue_sunhelp.org