[rescue] good spring cleaning

[vance at neurotica.com]

On Mon, 4 Aug 2003, Devin L. Ganger wrote:

> > An airbrush compressor might fit the bill.  They typically operate at
> > around 30psi.  The CFM is rather low too, so they're not likely to
> > unseat any components.  Decent ones can be had for about $80.
>
> What about the increased risk of static electricity?  That's why I've
> been trained to never use a compressor to clean out machines...

Use a high-flow filter.  That'll take care of the particulate that would
cause static.

Peace...  Sridhar