[rescue] Wanted: DGS-1210-10P PSU (was: Re: Network switch reco?)
Arno_1983 at gmx.de
Fri Oct 4 05:30:51 CDT 2019
Sorry, sent this to rescue-request@ first and only got the error message
> Subject: Re: [rescue] Network switch reco?
<74CAE824-BDC3-4D5E-9052-D2B94D80718A at gmail.com>[mailto:74CAE824-BDC3-4D5E-90
52-D2B94D80718A at gmail.com]
> Content-Type: text/plain; charset=us-ascii
> Yikes! I assiduously avoid switches with wall wart/in-line power adapters
> at all possible.
> Ken (Lionel)
On Sep 24, 2019, at 11:50, JP Hindin
<jplist2008 at kiwigeek.com>[mailto:jplist2008 at kiwigeek.com] wrote:
> I second this - I have two Netgear GS116s Gig switches both of which are
> still in active service after 14 years of service. The power packs on both
> have died _repeatedly_ - I just keep a supply of 12v DC supplies on hand
> Amazon - but the units themselves have been bombproof.
> If you don't need a managed switch or SFP ports, I have been very
> pleased with my D-Link DGS-1024D switch (24-port GigE). I bought it in,
> I think, 2011; earlier this year one port failed, and D-Link replaced
> the switch without argument or hassle under its lifetime warranty.
while I realize I may be a bit late to the party, so to speak, here goes...
I scored a D-Link DGS-1210-10P (Gigabit, PoE, yadda yadda - part of our video
surveillance setup) off work after it had croaked there (taken out a circuit
breaker and showed no activity whatsoever afterwards).B Not knowing about a
lifetime warranty (no idea whether that is even effective here in Germany), I
grabbed a screwdriver and cracked it open, of course tearing the warranty
Examination revealed that there was a coin-sized scorch mark in an
SMD-populated area on the solder side of the PSU PCB and even some
residue/evidence of sparking?B on the inside of the casing below;
disconnecting the power supply andB injecting 12V at the appropriate terminals
evoked a self test/init LED pattern, leading to the assumption that the main
board might still be okay.
The PSU is an open frame switcher made by APD (Asian Power Devices, Inc.),
Model NW-110A01, Input 100-240V AC 50-60Hz 1,7A max. and has two outputs, +54V
DC 1,6A andB +12V DC 2A.
An inquiry to the manufacturer how to obtain that part in Qty. one stayed (not
totally unexpectedly) unanswered.
So did anybody here by chance make the same mistake on a brain dead unit with
a functional supply and wouldn't mind parting with that?!
Thanks in advance,
Arno // DO4NAK
More information about the rescue