[rescue] Help me with a car part...

John Hudak jjhudak at gmail.com
Fri Jan 26 15:17:36 CST 2018

Hi Bill:
Cant help with this  off the top of my head, but.....
Spend any time with a volt meter and check out the existing wiring?

Are there any Crown Vic auto forums you could tap into?  For certain kinds
of cars there are 'enthusiasts' forms that are very informative...although
I am not sure that crown vic is one of those cars.

Try searching for a copy of the factory service manual and look at the
wiring diagrams.  If you find a crown vic forum, perhaps someone there will
know where to get a copy of the FSM.  You can also check of of the torrent
sites, but go in 'well armed'...lol

good luck

On Fri, Jan 26, 2018 at 2:09 PM, Bill Bradford <mrbill at mrbill.net> wrote:

> It's an in-dash clock out of a 1998-02 Ford Crown Vic.  What I need is the
> pinout for the wires coming out the back, so I can wire it into the
> radio harness for power and have a clock in my dash again - the
> new radio I'm installing doesn't have a "persistent clock" feature.
> Part number F8AF15000AB
> Pic:
> https://photos.app.goo.gl/rvPj4e18gCU8L03f2
> One wire is black
> One wire appears to be grey
> One wire is white with purple stripe
> One wire is green with yellow stripe
> I figure black is ground.  Otherwise
> one of them has to be constant 12V,
> one is "light up with dash", and the
> other is "dim or bright"?
> Google hasn't helped much.
> Any ideas?
> --
> Bill Bradford
> Houston, Texas USA
> _______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue

More information about the rescue mailing list