[rescue] looking for MVME162 ROM Images
plamenspam at afterpeople.com
Wed Feb 14 16:11:25 CST 2018
It's not very likely, but the garbage on serial console could be caused by
EPROM size jumper. Bear in mind that 162-212 comes with no SCSI chip, LC
cpu and 4MB so running BSD is not possible.
Theoretically you can add VME memory board and replace the 68LC040 with 68040.
This will allow you to netboot OpenBSD or NetBSD.
On Tue, Feb 13, 2018 at 3:16 PM, Richard <ejb at trick-1.net> wrote:
> Hi Folks
> I have an MVME162-212 board in a MVME Chassis (Cell-Master) that I am
> trying to bring up and run some form of BSD on. Unfortunately it doesn't
> seem to have the original Motorola boot roms with 162Bug and on boot it
> puts out what looks like garbage (have been through from
> 1200/2400/4800/9600/14400/19200/38400/57600 baud) and suspect it is
> trying to talk to special software running on a PC.
> Does anyone know where I might be able to find motorola 162 roms so I can
> then burn some?
> Also anyone know of a good reference for the RJ45 Serial port so I can
> double check the cable I have assembled is correct.
> Cheers and thanks in advance
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
More information about the rescue