[rescue] Clearpoint RAM - was Re: Sun-3 memory board

Rob Jarratt robert.jarratt at ntlworld.com
Sat Aug 5 13:43:17 CDT 2017

> -----Original Message-----
> From: rescue [mailto:rescue-bounces at sunhelp.org] On Behalf Of Chris
> Sent: 05 August 2017 19:19
> To: rescue at sunhelp.org
> Subject: Re: [rescue] Clearpoint RAM - was Re: Sun-3 memory board
> On 08/05/17 17:00, rescue-request at sunhelp.org wrote:
> > Re: [rescue] Clearpoint RAM - was Re: Sun-3 memory board
> I'm new here and this is the first post, so hope it gets to the correct
> I've had similar problems with old machines. The early static ram seems
> worst, but solder in memory can be pretty bad. The most recent example was
> the cpu board for a HP 9816 tech computer. That used 64kx1 memory devices
> soldered into the board, showing up loads of errors. Decided to replace
the lot,
> all 32 of them. Using sharp side cutters, cut pins along the edge of the
> and unsolder each pin to prevent damage to the board. Put in turned pin
> profile sockets and new ceramic 64 k devices. Not as bad as it sounds and
> worth the effort, as this machine is needed for the HP basic and IEEE
> ability. Also, just neat 68k machines.
> I'm also clearing ut a store this year. Loads of computer kit, from Sun
Ultra II,
> V210, V240 V440, Dec, IBM and more.
> Free, not trying make any money from this, but is there any interest in
the UK ?.
> Of course, prefer to get rid of it all at once, not bit by bit...

Hello Chris,

Always interested in DEC gear, what are you looking to clear out?



More information about the rescue mailing list