[rescue] Looking for small AT power supply

Bill Bradford mrbill at mrbill.net
Fri May 30 10:53:26 CDT 2014

On Thu, May 29, 2014 at 10:40:13PM -0400, Mark G Thomas wrote:
>> Link to current Retro 1 offering:
>> http://www.brielcomputers.com/wordpress/?cat=17
>> Any suggestions for a small AT PS would be appreciated.
>I just dug out the schematic for my early edition Replica-1. As far
>as I can tell, all you need is +5VDC, unless you are using the +/-12V
>for something connected to it, such as some older parallel ASCII keyboards
>needed -12V. I suggest just ordering a 5V 1A regulated wall wart from
>Jameco if you don't already have one in a junk box, and splice it onto
>an AT PS pigtail if you don't want to solder wires onto the board.

Found the pictures from when I built mine:


That was a *fun* project.


Bill Bradford
Houston, Texas USA

More information about the rescue mailing list