[rescue] SGI stuff that needs a home!
b4 at gewt.net
Thu May 8 08:56:44 CDT 2014
Sent from mobile device that advertises itself for no good reason
> On 8 May 2014, at 09:53, Jonathan Katz <jon at jonworld.com> wrote:
> These are posted on Nekochan but I have no takers :(
> 1) Indigo2... I think it's a 200Mhz R4400, ZX graphics, 64M of RAM.
> Green, with feet.
Toss it on my pile, please.
> 2) SGI O2 PARTS (system case was not worth saving; too many broken
> skins and bent chassis)
> 6x Kingston-branded O2 RAM. 32M sticks, branded KGS-O2/32. Small yellow
> 2x SGI-branded O2 RAM. 32M sticks. P/N 030-0881-002 100Mhz Hitachi
> chips. marked purple
> 4x SGI-branded O2 RAM. 32M sticks. P/N 030-0876-002 100Mhz NEC chips.
> one pair red, one pair yellow
> 1x O2 power supply. SGI P/N 060-0032-001 Sony branded.
> 1x AV module. It was working but the O2 Camera connector housing is bent.
> 1x SGI O2 drive tray. It has an IBM 36.4G SCA drive in it that is
> working. I can send with or without the drive.
> 1x PCI riser assembly, SGI P/N 013-2196-001
> 3) SGI Fuel, 600 Mhz. hinv:
> 1 600 MHZ IP35 Processor
> CPU: MIPS R14000 Processor Chip Revision: 2.3
> FPU: MIPS R14010 Floating Point Chip Revision: 2.3
> CPU 0 at Module 001c01/Slot 0/Slice A: 600 Mhz MIPS R14000 Processor
> Chip (enabled)
> Processor revision: 2.3. Scache: Size 4 MB Speed 300 Mhz Tap 0xa
> Main memory size: 1024 Mbytes
> Instruction cache size: 32 Kbytes
> Data cache size: 32 Kbytes
> Secondary unified instruction/data cache size: 4 Mbytes
> Memory at Module 001c01/Slot 0: 1024 MB (enabled)
> Bank 0 contains 512 MB (Standard) DIMMS (enabled)
> Bank 1 contains 512 MB (Standard) DIMMS (enabled)
> Integral SCSI controller 0: Version QL12160, low voltage differential
> Disk drive: unit 1 on SCSI controller 0 (unit 1)
> Integral SCSI controller 1: Version QL12160, low voltage differential
> IOC3/IOC4 serial port: tty1
> IOC3/IOC4 serial port: tty2
> IOC3 parallel port: plp1
> Graphics board: V10
> Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
> PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
> PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
> PCI Adapter ID (vendor 0x11c1, device 0x5802) PCI slot 5
> HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
> IP35prom in Module 001c01/Slot n0: Revision 6.210
> USB controller: type OHCI
> 4) Challenge/Onyx parts:
> 3x IO4 "primary" break outs (serial, ethernet, parallel) SGI P/N
> 5x "null" airflow/spacer VME space boards, I believe P/N 313-0889-002
> --- much of the foam has fallen off
> IO4 Primary and Secondary hooked together 030-0341-005 and
> 030-0329-??? ... so the same as before, but with a 2nd row for
> monitor, keyboard, mouse, etc.
> A different break-out IO panel for a frame grabber, P/N 030-0292-003
> Break-out/bulkhead (with cable) for external SCSI.
> Realty Graphics FunStuffs(tm)
> 030-0233-001A -- the board used to link multiple RE boards together.
> 030-0413-004 DG2
> 030-0363-005 GE10
> 030-0359(?)-001 RM4
> 030-0284-004 VS2
> 030-0342-007 VO2 (Sirius board) ... I do not have a Sirius break-out
> box! I DO have all the connectors for the bulkhead, though.
> Full set of terminating resistors for reality graphics
> Some kind of power distribution board, 030-0264-004
> 3x MC3
> 030-0604-106 MC3 .. all banks with 2 SIMMs except one.
> A second MC3 with all banks half-loaded.
> A 3rd MC3 with only one bank loaded (or one SIMM in each bank.)
> A different power distribution board (which I need to take a 2nd
> picture of to read the P/N)
> I have 2x 505x2 power boards, 030-0318-003
> Both SCSI JBOD trays
> 2x IO4. One is working 100%, the other I'm not 100% sure on.
> Mezzanine cards for the IO4s.
> 030-0242-005 (additional SCSI controller?)
> One with two FDDI cards (I have the FDDI accessories/break-out panels,
> One 030-0501-003 "short mezf"
> Remote VCAM 030-0502-205 for sending data to your remote VME box.
> A 3 VME -> 2 VME adapter with some kind of digital audio
> configuration. Best guess as to a P/N is 013-7032-001
> IP19 CPU Boards.
> I have a few 4 CPU boards and a few 2 CPU boards. The totals come out
> to be 12x 200Mhz R4400s and 2x 250Mhz R4400s.
> Jonathan Katz, Indianapolis, IN.
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
More information about the rescue