[rescue] SMD cap, X2602 (501-4882)

Robert Darlington rdarlington at gmail.com
Thu Nov 1 18:03:40 CDT 2012

Look at the pads under a microscope.  There's a good chance it didn't come
off clean and you'll need to rework the PCB.  I have no guess as to what
the value is, however there's a high probability I have one.  I've got
thousands of reels of surface mount caps and resistors.   4000 on a reel.
heh.  1000 lifetime supplies so I'm happy to share if you figure out what
it was.


On Thu, Nov 1, 2012 at 3:57 PM, Dennis Boone <drb at msu.edu> wrote:

> Long shot:
> On the solder side of an X2602 CPU board, connector edge, ruler position
> of about L2, just behind the bus connectors, there's a surface mount
> cap.  Well, there was.  It snagged on something and most of it went
> whirring into the wind.  I think it's 'screened C0890, or maybe C0830.
> Board swapping is for chumps. :)  Anybody know the value of this cap?
> Thanks,
> De
> _______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue

More information about the rescue mailing list