[rescue] reset firmware password on sun blade 150
nicolai-rescue at chocolatine.org
Thu Mar 18 23:14:08 CDT 2010
On Thu, Mar 18, 2010 at 03:34:10PM -0500, Nicolai wrote:
> On Wed, Mar 17, 2010 at 05:47:04PM -0500, Jonathan Patschke wrote:
> > If you can't boot the system and get root, boot the system without the
> > NVRAM chip, install it (correctly!) while at the OpenBoot prompt, and then
> > run the mkp commands.
> To clarify
Sorry all, just disregard that nonsense. Was looking at too many things
at the same time.
All is well now... I followed the steps described in that blog post I
And now have a working Sun Blade 150, firmware password removed. In
short, I booted the machine and at the OpenBoot prompt, removed the
NVRAM, then reinserted it, rebooted with Stop-N and set-defaults.
Thanks for your help!
More information about the rescue