[rescue] Can a drive from an EMC be used an a SunBlade

Sandwich Maker adh at an.bradford.ma.us
Sat Nov 14 08:01:00 CST 2009

" From: "Curtis H. Wilbar Jr." <rescue at hawkmountain.net>
" []
" Well, FC drives are similar to SCA SCSI Drives.... all functions on one 
" connector, and the drive is intended to go into a backplane.  So, any
" modification of the system would involve an alteration of the FC
" backplane in my SunBlade 2000... which is not something I'd want to
" do.... then there is the issue of is the 5V to be left unconnected, or
" is 12V to be send on the pins where 5V normally would be ?

i wonder if it's possible to pull the relevant emc docs up online...
or perhaps seagate would respond to the p/n; they used to have config
info for drives going back to the cdc days.
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh at an.bradford.ma.us                       and think what none thought

More information about the rescue mailing list