[rescue] Netra X1 HD tray
mailinglists at sysop.ca
Mon Mar 16 15:53:28 CDT 2009
Lionel Peterson wrote:
> On Mon, Mar 16, 2009 at 3:06 PM, Jonathan J. M. Katz <jon at jonworld.com>
>> On Mon, Mar 16, 2009 at 2:56 PM, Mark Brown <sunrescue at marknmel.com> wrote:
>>> My X1 had a spare spud installed. Have you looked inside yet?
>>> Yes, the ide works much better than that of an Ultra-5/10. I suspect it
>>> still has the 128GB limit though....
>> No idea from this end. The X1s shipped with 40GB drives, max, per the
>> handbook. The V100s did 80GB.
> My assumption is that this has more to do with heat than anything else
> - I noticed the chassis has room for two tiny fans on the end opposite
> the P/S, do other models have two fans instead of the one fan and
> cover plate mine has?
> In retrospect it might have been better to have a faster/later rev.
> MB, for the faster CPU and increased RAM capacity (2 Gig vs. 1 Gig for
> my 400 MHz board), but it should be fine... It will be replacing a
> thouroughly under-utilized U5 with a 440 MHz CPU, which should open up
> a few U spaces on the rack (1U vs 2-3U for the Ultra 5)...
> Lionel Peterson
> lionel4287 at gmail.com
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
My 400Mhz netra X1 officially supports 1GB ram but I've had 2 GB in my
400mhz netra's for 2+ years without issue.
More information about the rescue