[rescue] Netra NFS/Enterprise 150 question

Mike Hebel nimitz at nimitzbrood.com
Fri Feb 6 16:14:13 CST 2009

On Feb 6, 2009, at 4:06 PM 2/6/09, Carl R. Friend wrote:

>    I've got a Netra NFS (so the badge on what is otherwise an E-150
> says) that has a temperature readout on the front panel that is
> quite obviously reading what looks like a bogus temperature (I know
> for a fact that my cell at $WORK is not >40 degress C) and I'm
> curious where the sensor is.
>    I suspect the issue is bad housekeeping (the thing was pretty
> well full of dust) so I'm curious where the sensor is so I can
> figure out whether I need to take the whole machine to pieces and
> apply the air to it (likely outdoors).  Readings from the various
> disks installed in the array indicate mid- to upper- 30C temps.

Good luck getting that thing to work right.  I took mine apart like a  
madman and cleaned it all to hell and it still never read right.

But then I never did find an actual sensor so I think it's on the LCD  
board itself or on the motherboard.


In the end the journey only matters if you've helped someone along  
the way.

More information about the rescue mailing list