[rescue] Sun systems
bdeloria at gmail.com
Thu Oct 11 13:31:39 CDT 2007
I managed to get my hands on an Avocent power strip that would run the
entire height of a full cabinet for about $20 because some of the power on
lights had burnt out in the outlets. Needless to say it had two nice
features, first was there was a 3-5 second delay in powering on each outlet,
it would cascade from top to bottom. with a time delay in each so you didn't
have to go around and power on machines one by one or worry about a complete
power loss and popping a breaker or a ups with a huge intital surge. Other
nice part was that it had a digital readout of the amperage in .5
increments. At bit more trustworthy than a UPS panel but not as cumbersome
as having to pull and outlet / panel cover off and get out the clamp on amp
On 10/11/07, Aaron Finley <nerp at atfinley.com> wrote:
> wa2egp at att.net wrote:
> > -------------- Original message ----------------------
> > From: Peter Corlett <abuse at cabal.org.uk>
> >> On Wed, Oct 10, 2007 at 08:28:17AM -0500, Lionel Peterson wrote:
> >> [...]
> >>> One other thing to keep in mind, the Ultra 2 uses "only" 350 watts of
> >>> power, and in these days of killowatt PCs, that "almost" low-power...
> >> FWIW, my x86 servers typically draw about 90-120W.
> >> My Ultra 30 is too noisy and power-hungry to consider running 24/7.
> > Hnmmm....my Ultra 30 draws only about 110-120 watts. No that much
> > more. BTW, I measured it. :)
> I think people are confusing the number of the sticker on the power
> supply with how much the system actually draws. I have never seen a
> system draw more than one "bar" of my 1400VA UPS.
> -- Aaron
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
More information about the rescue