[rescue] Terminal server question
pat at computer-refuge.org
Sat Nov 10 20:08:23 CST 2007
I've never seen this before, including on the ones I own. Maybe it
depends on what version of the software you run on it?
On Saturday 10 November 2007 20:00, laz at moaa.net wrote:
> as I recall on the 1600 xyplex, 1/2 the ports will be dead unless you
> have a code to turn them on in the base code. and its a code based on
> its mac address unfortunately.
> > In article <f15211ae3dff60fbec77bda70f931f6a at valleyimplants.com>,
> > Scott Quinn <compoobah at valleyimplants.com> writes:
> > > I can find some information about the 1600, but very little about
> > > the Network 9k/TS720, and not too much about how well it would
> > > work for the hobbyist (both of them have the Flash cards). What
> > > does the list think?
> > My experience has been that you need some host software to make any
> > of the terminal servers work and that's the hard part; obtaining
> > the hardware seems relatively easy, but the hardware and software
> > always seem to get separated.
> > --
> > "The Direct3D Graphics Pipeline" -- DirectX 9 draft available for
> > download
> > <http://www.xmission.com/~legalize/book/download/index.html>
> > Legalize Adulthood! <http://blogs.xmission.com/legalize/>
> > _______________________________________________
> > rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
Purdue University ITAP/RCAC --- http://www.rcac.purdue.edu/
The Computer Refuge --- http://computer-refuge.org
More information about the rescue