[rescue] 50-pin SCSI ribbon cables?
pat at computer-refuge.org
Thu May 24 17:59:20 CDT 2007
On Thursday 24 May 2007 18:48, Sridhar Ayengar wrote:
> If you're going to do that, you might be able to get away with using a
> Molex plug in there if you put a 90-degree bend in the pins on the
> plug and point the connector off to the side. I'm pretty those pins
> would be strong enough.
At that point, I'd probably unsolder the connector, and solder a short
jumper with a male molex on the other end in its place...
Purdue University ITAP/RCAC --- http://www.rcac.purdue.edu/
The Computer Refuge --- http://computer-refuge.org
More information about the rescue