[rescue] Looking for an USII/300 module and answer to question about PN's
francois.dion at gmail.com
Wed Jan 18 11:02:48 CST 2006
On 1/18/06, dsimmons <dsimmons at libx.siu.edu> wrote:
> So, I am searching for an UltraSparc II/300 CPU module to buy from a
> resq member or possibly trade, if I have anything they would find of
> use. My current CPU says: 501-4849-03 Rev 61 - I know that the CPU
> modules must be matched sets, but how precisely must they match?
I think if you have a recent enough OBP you are ok there.
> would a 501-4849-02 (if there is such a thing) work? Or, would it have to be
The only indications are:
# The minimum operating system is Solaris 2.5.1.
# Ultra 2 OBP 3.7v0 and CPU >=501-3132-07 is required.
# UPA Terminator 501-4843 is required if only one module is installed
on Ultra 2 CPU <=501-3132-12.
# Jumper J2301 on Ultra 2 system board 501-3132 may need to be
adjusted for the 300MHz module.
# Modules <=501-4849-02 are not compatible with the Ultra 60.
# UltraSPARC II revision 1.1 is not compatible with the Netra ft 1800.
# Mixing module speeds is not supported.
# The Ultra 450 and Enterprise 450 require DC-DC Converter 300-1322.
# Option X2240A includes a Module and DC-DC Converter 300-1322.
That would tell me that as long as you are matching CPUs by speed +
cache (ie 300MHz 2MB cache) you are ok. So any 501-4849 should work.
This is for the 400MHz but mentions the settings on the 300MHz.
I cannot find anywhere that you need precise matching of revisions.
More information about the rescue