[rescue] Netra T1 105 Problem
ploopster at gmail.com
Wed Jan 11 18:06:15 CST 2006
J. Alexander Jacocks wrote:
> Sridhar Ayengar <ploopster at gmail.com> wrote:
>>Dan Williams wrote:
>>>On 11/01/06, Sridhar Ayengar <ploopster at gmail.com> wrote:
>>>>I have a Netra T1 105 here that doesn't produce any output on its serial
>>>>ports. It appears to power up, and it clicks the CD-ROM drive and hard
>>>>drive (left bay), but I never get anything on the serial ports. Does
>>>>anyone have any pointers as to anything I should be checking? Is there
>>>>a service manual for this around anywhere?
>>>If you the cable is known to be good (same as a cisco), someone may of
>>>changed the settings. Try a monitor and keyboard and see what you get.
>>I'm not at the machine right now, but I believe that it has neither
>>graphics nor a keyboard port.
>>And I've tried several cables.
> My suggestion is to pop the cover. There is an LED display on the inside of the case, facing a plastic divider. This display is a relic of the Netra CP1500 board used to create the Netra T1/105. For reference, the LED display will cycle 'H' 'E' 'L' 'P' when the T1 is at the OK prompt.
> I have a T1 in the same condition. :-)
And if it is indeed exhibiting this behavior, is there any way to get it
to start talking out it's serial port, or is it screwed?
More information about the rescue