[rescue] Plextor PX-32TSi and ultra 1

Francois Dion francois.dion at gmail.com
Sun May 15 19:39:29 CDT 2005

On 5/13/05, Mike Nicewonger <twmaster at twmaster.com> wrote:
> >
> > Unfortunately, not knowing what generates the error, there's not much
> > I can do. So I guess this UPA motherboard will go to the trash. I'll
> > save the nvram module.
> OK, so we have narrowed the issue down to the system board. Now, try
> swapping the NVRAM. I honestly think that is your problem. Be aware, the
> system board you have that is functional is an older (non E) model of the
> U1. The major differences are: 10 MBps LE Ethernet as opposed to 10/100
> FW SCSI instead of narrow SCSI and the UPA slot.

After numerous swapping of all kinds of things, something must have
been reseated (nvram chip possibly) because now my UPA boots from the

Thanks for the tips.


More information about the rescue mailing list