[rescue] sun kbord/mouse

Jochen Kunz jkunz at unixag-kl.fh-kl.de
Wed Apr 20 03:22:43 CDT 2005

On Mon, 18 Apr 2005 16:35:09 -0800
Kevin Foote <kevin.foote at gmail.com> wrote:

> Also does anyone know if my sgi mtr GDM...  will accept the output
> from this box?
Depends. If the SGI tube has BNC inputs and you have a Sun BNC cable it
should work. If machine and tube are 13W3 then you may get no picture.
The problem here is a different pinout Sun <=> SGI for the 10 extra pins
in the 13W3 connector. You should get around this with a custom cable.
Connect the CSync signal from the Sun via an 560 Ohm resistor to the
green signal to generate sync on green. Connect only R, G+Sync and B
signals to the SGI monitor.


Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/

More information about the rescue mailing list