[rescue] e4k / 250/1mb cache vs 250/4mb cache

Patrick Giagnocavo patrick at mail.zill.net
Fri Oct 8 13:55:12 CDT 2004

On Fri, Oct 08, 2004 at 02:28:39PM -0400, Phil Stracchino wrote:
> On Fri, Oct 08, 2004 at 12:38:05PM -0400, Patrick Giagnocavo wrote:
> > hi all,
> > 
> > I have an e4000 and have some system boards woth 250Mhz/1mb cache CPUs, and some with 250Mhz/4mb cache CPUs.
> > 
> > Can I put both kinds of boards in the E4K at the same time and get reliable operation?
> Far as I know, "Yes, but don't mix'em on the same board."

Well, I don't have the tool, so it is a moot point.  

This will get me a 4x250Mhz/1mb + 4x250Mhz/4mb = 8 way E4000 system.

Assuming all the RAM is used, I will end up with about 5.5GB RAM
(might try to move a few pieces around in order to get 4 or 8 way


This page seems to say "as long as you don't have 167Mhz's anywhere in
the system, you are OK" :




More information about the rescue mailing list