[rescue] More on the Crimson video
fdion at atriumwindows.com
Sun May 30 20:05:17 CDT 2004
Francois Dion wrote:
> I had erronously tought the Crimson's output was 3BNC. Seems it's the
> 4BNC section that's an output. The 3BNC RGB has an alpha on green, not
> sure what that's really for. Neither the 3bnc or 4bnc will work.
I was checking which port on the DG1 was connected to what, and they've
been wrong all this time. I wired the 4BNC to the middle connector on
the DG1 and I'm now getting the monitor to wake up after about 12
seconds on power up. The bad thing is that I'm getting a bunch of
vertical lines. Sync is fine, just that it is displaying vertical lines
at regular intervals (possibly every other pixel or something).
Bad board? This is a VGXT with 2 RM3 and GE6/GM3/DG1.
More information about the rescue