[rescue] SGI Crimson 3BNC

Jochen Kunz jkunz at unixag-kl.fh-kl.de
Fri May 28 02:55:20 CDT 2004

On Thu, 27 May 2004 17:45:57 -0400
Francois Dion <fdion at atriumwindows.com> wrote:

> Alright, I got a few BNC connectors and I have a VGA HD15 connector. I
> got wires. I got a soldering iron and solder. How do I connect this to
> get a picture on my SGI monitor (SOG, dual input: 13W3/VGA))?
Pinout of the VGA style SubD HD15:
1  	RED  	 	Red Video (75 ohm, 0.7 V p-p)
2 	GREEN 		Green Video (75 ohm, 0.7 V p-p)
3 	BLUE 		Blue Video (75 ohm, 0.7 V p-p)
4 	ID2 		Monitor ID Bit 2
5 	GND 		Ground
6 	RGND 		Red Ground
7 	GGND 		Green Ground
8 	BGND 		Blue Ground
9 	KEY 	- 	Key (No pin)
10 	SGND 		Sync Ground
11 	ID0 		Monitor ID Bit 0
12 	ID1 or SDA 		Monitor ID Bit 1
13 	HSYNC or CSYNC 		Horizontal Sync (or Composite Sync)
14 	VSYNC 		Vertical Sync
15 	ID3 or SCL 		Monitor ID Bit 3

Should be obvious how to wire this up to three BNC connectoers. ;-)


Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/

More information about the rescue mailing list