[rescue] Challenge L -12V overvoltage?
Sheldon T. Hall
shel at cmhcsys.com
Tue May 11 11:39:24 CDT 2004
Francois Dion says ...
> Francois Dion wrote:
> > Alright, the Challenge was sleeping for the past few weeks, and now
> > yesterday I powered it back on and I got a message on the integrated
> > display:
> > -12V supply over voltage (or something like that)
> > I powered it back off, then powered it back on. The error didn't come
> > back, but it wont go thru it's post. Just a message stating that there
> > is an error in the log history. Any ideas how to bring it back up? No
> > console output whatsoever either.
> Found part of the answer... According to one manual, on the system
> controller panel press menu, then select system log. Now I did do
> that... Is there something else that needs to be done?
I don't know, but I'm very interested in what you find out!
I read somewhere that the stuff in the NVRAM hardware error log get copied
to the SYSLOG once the system starts up, but I don't recall seeing anything
about having to clear the hardware log or anything like that.
There's an owner's manual at
www.sgi.com/products/legacy/pdf/challenge_owners_guide.pdf, but I don't see
anything that directly refers to the problem you're having.
More information about the rescue