[rescue] Tektronix printer

Sandwich Maker adh at an.bradford.ma.us
Thu Apr 15 17:38:18 CDT 2004

" From: Mike Parson <mparson at bl.org>
" On Thu, Apr 15, 2004 at 05:30:36PM -0400, Kevin Loch wrote:
" >
" > 2. Place a drop of wd-40 on the inside and outside edges
" > of the clutch housing, *without getting oil anywhere else*.
" > On the outside edge apply oil to between the clutch housing
" > and the disc at the end.
" Probably better to use another type of oil.  WD-40 is a penetrating
" oil, not really best for lube-type applications, more for, 'this nut is
" rusted onto this bolt' applications.

that's right; the 'wd' stands for 'water displacer'.

i'd nominate 3-in-1 oil for this.
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh at an.bradford.ma.us                       and think what none thought

More information about the rescue mailing list