[rescue] Dual head Octane SI + ESI
jkunz at unixag-kl.fh-kl.de
Mon Sep 29 08:52:38 CDT 2003
On Mon, Sep 29, 2003 at 02:45:33PM +0200, Bjorn Ramqvist wrote:
> I feel horrified thinking we're ricing up our Octanes. *shiver*
As I didn't want to use red (already used) or yellow/orange (looks
bad), didn't want to use green (green skin) and I had the blue LEDs
right at hand, I choose this. It is better then a dark light bar.
> Anyway, I'll probably order some of the white LEDs. Are you using 3mm or
> 5mm? 3mm would be the most space efficient, but they're harder to solder
> onto the bord.
I have 5 mm LEDs. I used only one insted of the two bulbs. I had only two
blue LEDs and two Octanes. If I had the chooice, I would try white 3 mm
LEDs. There are other options like EL foil or EL bands or cold kathode
or ... It is amazing what these case modder kids use...
> For some reason SGI decided to use a red LED for the fault light. Why on
> EARTH didn't they use regular white/blue/green/whatever LEDs for the
> normal light? *confused*
Good, bright white and blue LEDs wheren't there when the Octane was born.
Green LEDs have no good contrast to the green skin and yellow/orange
is ugly. (IMHO)
More information about the rescue