[rescue] Dual head Octane SI + ESI
v53278 at g.haggve.se
Mon Sep 29 06:21:18 CDT 2003
Jochen Kunz wrote:
> On Mon, Sep 29, 2003 at 12:15:44PM +0200, Bjorn Ramqvist wrote:
> > > MOT10 Board: barcode KGR298 part 030-1241-002 rev J
> > Non-existent in mine.
> That is the SE GFX.
Is it? In that case, shouldn't the SI show up there too?
Do you have a PCI carrier? Cause I don't...
> > Twice as much as mine, and I only have the 1.2 Xbow. :-(
> Well. 1 GB is still enough. Xbow 1.2 seams to be only a disadvantage
> if you need certain options that require a higher revision.
1GB is certainly enough, and the only disadvantage with only 1.2 Xbow is
that I can't do VPro and such niftyness. I don't even know if I can do
> The skin is green with the new "sgi" logo. The R10k machine had the
> old front with the old 3D cule logo. The old front looks much nicer so
> I swaped them.
Incase you'd ever sell these systems, be sure to include the correct
frontskin. I suspect there are far too many out there mislabeled, just
like old Sun4m-machines with, for instance, SS20 cover on an SS5.
Yes, I'm a picky bastard. :-)
> Well, meanwhile there are white LEDs too. Blue LEDs got quite common in
> the last time. It shouldn't be a big problem to get one from an electronic
> parts supplier.
I'd guess. I have a radio repairment show down town here that hold
(among many other things) blue leds. I have yet to find usefulness for
such things, until now that is.
White leds would be cool. Are you using wide-angle clear glass leds? If
the angle is too narrow, it would probably give a strange light
More information about the rescue