[rescue] Dual head Octane SI + ESI
jkunz at unixag-kl.fh-kl.de
Mon Sep 29 05:47:34 CDT 2003
On Mon, Sep 29, 2003 at 12:15:44PM +0200, Bjorn Ramqvist wrote:
> > MOT10 Board: barcode KGR298 part 030-1241-002 rev J
> Non-existent in mine.
That is the SE GFX.
> > Main memory size: 2048 Mbytes
> > Xbow ASIC: Revision 1.4
> Twice as much as mine, and I only have the 1.2 Xbow. :-(
Well. 1 GB is still enough. Xbow 1.2 seams to be only a disadvantage
if you need certain options that require a higher revision.
> Mhm. I bet you have the "Sgi" logo too, instead of the usual "Silicon
The skin is green with the new "sgi" logo. The R10k machine had the
old front with the old 3D cule logo. The old front looks much nicer so
I swaped them.
> Last time I removed the front skin, I noticed one of the two bulbs have
> gone black. Some day I will do this mod too. (First up is to get my
> hands on some blue leds that fits my needs)
Well, meanwhile there are white LEDs too. Blue LEDs got quite common in
the last time. It shouldn't be a big problem to get one from an electronic
More information about the rescue