[rescue] Beige MAC G3 266 Mhz
nate at portents.com
Thu Oct 30 22:05:55 CST 2003
On Thu, 30 Oct 2003, Jonathan C. Patschke wrote:
> On Thu, 30 Oct 2003, James Denton wrote:
> > You may want to research this machine a little more. The Rev. A machines had
> > problems with more than one hard drive on the same bus (no slave support).
> Disabling slave support was the -workaround- in the firmware. The older
> rev systems that didn't have this workaround would do spectacularly
> nasty things if you had two drives on the bus.
Rev B and Rev C ROMs work fine in a Rev A, speaking from my experience and
the experience of many others:
More information about the rescue