[rescue] Cheap(?) USII 360Mhz CPU
rnovak at indyramp.com
Wed Jun 11 15:58:04 CDT 2003
On Wed, 11 Jun 2003, Kurt Mosiejczuk wrote:
> On Wed, 11 Jun 2003, Robert Novak wrote:
> > The Tatung Ultra 2s support 360, on the same jumper setting as is used for
> > the 400MHz module. See http://www.indyramp.com/tatung/ or
> That would rock, but I don't know if I would want to try it and not
> have it work for $50+. Once I get a job, I wouldn't mind so much.
If I had a job, I'd offer to buy it off ya if it didn't work, since I *do*
have a Tatung U2 here.
> Anyone know anything on if the 250Mhz CPUs going for about $20 will work
> in a U2? There seem to be a good number of them on ebay, but they are
> pretty much all listed as Ex000 pulls...
If it's Ex00 then definitely no. It's like the difference between
FCPGA and Slot 1 in the PC world, except that I know of no UltraSPARC
You want modules in the X1188-X1194 range only. X1188A is 167, X1193A is
400 for U2 (X1194A is 400 for E250, not sure what the difference is, maybe
FSB-equivalent?). Anything in the middle *should* work.
Robert Novak - rnovak at indyramp.com
More information about the rescue