[rescue] Sun monitor cable

Jochen Kunz jkunz at unixag-kl.fh-kl.de
Wed Jan 22 13:28:51 CST 2003

On 2003.01.22 19:12 vance at neurotica.com wrote:

> It depends on if the Sun supports sync-on-green.  If it doesn't, then
> it won't work out without some electronic mumbo-jumbo.
In case of a C-Sync signal, standard on Sun SBus graphic cards, the
"electronic mumbo-jumbo" can be reduced to a single 470 Ohm resistor.
Simply connect the C-Sync signal via the 470 Ohm resistor to green. A
BNC T adapter from your old 10Base2 cabling is nice for this... But you
will need a Sun style 13W3 => 4 BNC (RGB+Sync) cable.


Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/

More information about the rescue mailing list