[rescue] Sun SLC/ELC
Curtis H. Wilbar Jr.
rescue at hawkmountain.net
Tue Jan 14 10:24:33 CST 2003
Interesting ideas. Probably helps to have SLC/ELC boxes to gut for
the connector stuff though.... otherwise your only interface is this
one edge connector.... Did these projects require gutting SLC/ELC
boxes for those parts ?
>Date: Tue, 14 Jan 2003 11:07:33 -0500
>Subject: Re: [rescue] Sun SLC/ELC
>Mime-Version: 1.0 (Apple Message framework v551)
>From: Dave McGuire <mcguire at neurotica.com>
>To: The Rescue List <rescue at sunhelp.org>
>On Tuesday, January 14, 2003, at 05:21 AM, Jochen Kunz wrote:
>>> I have some Sun SLC/ELC cpu boards.
>>> I've been keeping these around in case I had an SLC/ELC to the
>>> collection, but SLC/ELC is low on my desired collectibles, so
>>> if there is interest let me know... FS or FT.
>> You know that you can operate a SLC / ELC board without the machine?
>> only need to feed +5 / +12 / -12 V (the later only for the RS232) to it
>> to run. I mounted a ELC board in an external SCSI enclosure together
>> with a disk, CDROM and CDRecorder. Makes a perfect toaster with NetBSD.
> Yes a friend of mine built a card cage and ran about ten of them from
>one power supply several years ago. He used them for web servers at
>his [then small and home-grown] ISP. They worked very well; I was
>always envious of that setup!
>Dave McGuire "She's a cheek pincher. I have scars."
>St. Petersburg, FL -Gary Nichols
>rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
More information about the rescue