[SunRescue] SCA drives...

Mike Nicewonger twmaster at earthlink.net
Wed May 3 17:20:03 CDT 2000

I have tried to put half height drives in the SS5/20 boxen, it never works,
the top edge of the drive hits the upper drive connector on the backplane. I
have tried Quantum, Seagate and IBM drives all the same problem.

Mike N
----- Original Message -----
From: <apotter at icsa.net>
To: <rescue at sunhelp.org>
Sent: Wednesday, May 03, 2000 5:50 PM
Subject: Re: [SunRescue] SCA drives...

> GLeblanc at cu-portland.edu said:
> > You mean a single half-height SCA drive didn't even fit?  The SCA
> > connector is at the same height, and putting in in the carrier should
> > have the connector aligned correctly.  Using 2 drives definately
> > wouldn't work, there isn't enough space.
> The bail on the carrier wouldn't go down over the drive, so it was hack up
> expensive carrier, or swap drives.  I need the 9 in the other unit more
> AL
> _______________________________________________
> Rescue maillist  -  Rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue

More information about the rescue mailing list