[geeks] Sun ethernet and crystal

[Mouse]

> I have a Sun-branded PCI Ethernet which has a sticker saying, among
> other things, P/N: 5132E-ST.  (Another sticker says "PCI 10/100".)

> [...crystal broken free of solder joints...]

Good news!  Turns out I had another, apparently identical, card lurking
in my pile of Ethernets, and that one has the crystal solidly in place.
So I think I have a usable reference now.  Thank you all!

Based on the apparently-intact card, the crystal is placed with its
pins 1 and 2 away from the Ethernet jack (ie, towards the closest short
edge of the card).  Or, equivalently, pins 1 and 4 towards the PCI
connector, away from the closest long edge of the card.  The printing
is right-way-up when holding the card component side up, Ethernet jack
away from you (PCI connector on the left).

/~\ The ASCII				  Mouse
\ / Ribbon Campaign
 X  Against HTML		mouse at rodents-montreal.org
/ \ Email!	     7D C8 61 52 5D E7 2D 39  4E F1 31 3E E8 B3 27 4B